How do I read my tyre size? +
Your tyre size is printed on the sidewall in a format like 205/55R16 91V. The first number (205) is the width in millimetres, the second (55) is the aspect ratio as a percentage of the width, R means radial construction, and 16 is the wheel diameter in inches. The number after (91) is the load index and the letter (V) is the speed rating. Your vehicle handbook and the sticker inside the driver's door frame show the correct size for your car.
Do I need to replace all four tyres at the same time? +
No, you do not need to replace all four tyres at once unless they are all worn. It is best practice to replace tyres in pairs (both fronts or both rears) to maintain even handling. The newer tyres should always go on the rear axle for stability, even on front-wheel-drive cars. Mixing tyre brands on the same axle is not recommended but is acceptable across different axles.
What happens during an MOT tyre check? +
During an MOT, the examiner checks that all tyres are the correct size and speed rating for the vehicle, that tread depth is at least 1.6mm across the central three-quarters, that there are no cuts, bulges, or exposed cords, and that tyres on the same axle are of the same type (e.g. not mixing radial and cross-ply). Incorrect tyre pressure is not an MOT failure but the examiner may issue an advisory.
Should I check my tyre pressures regularly? +
Yes — you should check tyre pressures at least once a month and before any long journey. Under-inflated tyres increase fuel consumption by up to 3%, reduce braking performance, and cause uneven wear that shortens tyre life. Over-inflation reduces grip and causes the centre of the tread to wear faster. Your correct pressures are listed in the vehicle handbook and on a sticker inside the driver's door frame or fuel filler cap.
Can I get tyres fitted at my home or workplace in Brighouse? +
Absolutely. Mobile tyre fitting is one of the most popular services in Brighouse. A fully equipped van comes to your home, workplace, or any safe location with the tyres you need. The fitter brings a hydraulic jack, wheel balancer, torque wrench, and all necessary equipment. Most jobs are completed in 20 to 30 minutes per tyre without you needing to leave the building.
Are winter tyres worth it in the UK? +
Winter tyres use a softer rubber compound and a different tread pattern that provides significantly better grip below 7°C — not just in snow, but on cold, wet roads. In independent tests, winter tyres reduce braking distances by up to 11 metres compared to summer tyres in cold conditions. If you regularly drive in rural areas, hills, or northern parts of the UK, they can be a worthwhile investment from October to March.