Is it safe to drive on a slow puncture to reach a tyre fitter? +
If the tyre is only slightly low and you can maintain safe control of the vehicle, you can drive a short distance at reduced speed — no more than a few miles at 20–30mph. Check the tyre regularly as you drive. If the tyre is visibly flat, the sidewall is bulging, or the car feels unstable, do not drive at all. Call a mobile tyre fitter to come to your location instead.
Are winter tyres worth it in the UK? +
Winter tyres use a softer rubber compound and a different tread pattern that provides significantly better grip below 7°C — not just in snow, but on cold, wet roads. In independent tests, winter tyres reduce braking distances by up to 11 metres compared to summer tyres in cold conditions. If you regularly drive in rural areas, hills, or northern parts of the UK, they can be a worthwhile investment from October to March.
How long does it take to fit a new tyre? +
A single tyre change typically takes 15 to 30 minutes, including removing the old tyre, fitting and balancing the new one, and torquing the wheel nuts to the correct specification. If you are having all four tyres replaced, expect the job to take around 45 minutes to an hour. Mobile fitters work to the same timescales as a garage.
How do I read my tyre size? +
Your tyre size is printed on the sidewall in a format like 205/55R16 91V. The first number (205) is the width in millimetres, the second (55) is the aspect ratio as a percentage of the width, R means radial construction, and 16 is the wheel diameter in inches. The number after (91) is the load index and the letter (V) is the speed rating. Your vehicle handbook and the sticker inside the driver's door frame show the correct size for your car.
What happens during an MOT tyre check? +
During an MOT, the examiner checks that all tyres are the correct size and speed rating for the vehicle, that tread depth is at least 1.6mm across the central three-quarters, that there are no cuts, bulges, or exposed cords, and that tyres on the same axle are of the same type (e.g. not mixing radial and cross-ply). Incorrect tyre pressure is not an MOT failure but the examiner may issue an advisory.
What are run-flat tyres and can any fitter work on them? +
Run-flat tyres have reinforced sidewalls that support the weight of the car even with no air pressure, allowing you to drive up to 50 miles at 30mph after a puncture. They require specialist fitting equipment and a TPMS reset after replacement. Not all garages can work on run-flat tyres, but most professional mobile fitters and tyre centres are fully equipped. Run-flat tyres are typically 20–40% more expensive than standard equivalents.